8
JUICE OUTLET CAP
Close the juice outlet cap to mix your juice inside your juicer. Open the juice
outlet cap to dispense as required into the juice container.
CARING FOR THE SILICONE PULP PLUG
It is important to ensure that the pulp plug is always closed before juicing.
When you are cleaning the juicing drum (bowl) gently unplug the seal and
rinse under water.
Replace the seal after cleaning so your juicer is ready to use next time.
SILICONE COVER
Ensurethesiliconecoveristtedpriortouse.Itisanothermeasuretoensure
that the motor is sealed from any juice overspill.
Clean after use by removing it from the motor base. Keep your spare silicone
covers handy in case of misplacement.
EN
To Next Page
Loading...