iv Bio-Tek FL600
Revision History
Revision Date Changes
A 4/97 Release to production
B 10/97 Added Stay Clear safety symbol. Corrected Electrical, Optical,
and Performance Specifications sections. Added CE Mark
information. Deleted Appendix A.
C3/98
Preface: Added warranty. Page 2-1: Modified instructions for
Setting Up the FL600 Reader. Page 5-2: Changed electrical
specification for fuses. Page 5-11: Modified text and data on
serial communications to reflect parity differences between KC4
reader software and FL600 diagnostic software. Page 5-13: On
filter table, modified use of excitation filters and added two new
filter wavelengths.
D6/98
Preface: Changed phone numbers and e-mail addresses.
Chapter 4: Changed air filter maintenance procedure. Added
lamp replacement procedure.
To Next Page
Loading...