To Next PageTo Next Page
Need help?Do you have a question about the Biobeat Briyout and is the answer not in the manual?
The Biobeat Chest-Monitor is a medical device designed for continuous health monitoring in a home setting, integrated with the Biobeat Hospital at Home mobile app and web platform. It is a non-invasive device that attaches to the chest to collect physiological data.
The Biobeat Chest-Monitor is primarily used for continuous monitoring of various physiological parameters. While the specific parameters are not detailed in this quick user guide, typical chest monitors of this type often measure heart rate, respiratory rate, and potentially other vital signs. The device is intended for use under the guidance of a healthcare provider, with data accessible via a dedicated mobile application and a web platform. This allows for remote monitoring and management of patient health.
1. Initial Setup and Placement: * Powering On: Press the power button until a blue light illuminates. * LEDs: Ensure the LEDs on the back of the sensor are continuously flashing. * Sensor-Adhesive Unit Connection: Attach the sensor to the adhesive unit's plastic frame. Align the vertical line on the sensor with the line on the adhesive unit. Apply pressure to the four corners until plastic clasps click, securing the sensor. * Chest Preparation: * Remove any hair from the chest area where the monitor will be placed. * Clean the chest with an alcohol swab and wait until it is completely dry. * Adhesive Unit Application: * Remove the white cover from the back of the adhesive unit. * Attach the chest-monitor to the chest. * Positioning: The monitor should be placed 1 cm to the left of the sternum. The top of the adhesive unit should be in line with the sternal notch. * Orientation: The Biobeat logo should be at the bottom of the sensor, and the vertical line at the top of the sensor. * Ensure the entire surface of the adhesive unit is attached to the skin.
2. Powering Off: * Press and hold the power button for four seconds. Upon release, the LEDs on the back of the sensor will turn off.
3. Mobile App Integration: * App Download: Download the "Biobeat Hospital at Home Chest-Monitor App" from the Google Play Store or Apple App Store. * Bluetooth Connection: * Ensure your phone's Bluetooth is enabled. * Important: Do not pair the device directly through your phone's Bluetooth menu. * Open the Biobeat app and follow the in-app instructions for pairing the device. * Baseline Setting: Your healthcare provider must set the baseline for the device on the Biobeat Web Platform for proper functionality.
Important Notes:
General| Brand | Biobeat |
|---|---|
| Model | Briyout |
| Category | Personal Care Products |
| Language | English |
