To Next PageTo Next Page
Need help?Do you have a question about the BIOLABO Diagnostics KENZA 240 TX and is the answer not in the manual?
General| Brand | BIOLABO Diagnostics |
|---|---|
| Model | KENZA 240 TX |
| Category | Measuring Instruments |
| Language | English |
Detailed specifications of the analyser's operation, performance, and components.
Instructions for inspecting and unpacking the instrument and accessories.
Procedure for safely placing and setting up the analyser.
Steps to install the analyser's management software on a computer.
Initial procedures for priming the system and performing basic checks.
Step-by-step guide to power on the external computer and the analyser.
Accessing functions for managing, programming, and calibrating methods.
Detailed steps for defining new analytical methods and parameters.
Procedure for editing existing method parameters.
Accessing calibration and control functions and options.
Procedure for performing calibrations and running quality controls.
Monitoring quality control data, statistics, and Westgard rules.
Steps for entering patient data and selecting tests.
Guidelines for preparing serum cups and primary tubes for analysis.
Checking reagent positions and identifying missing or insufficient reagents.
Procedures for initiating the analytical run, including checks and selections.
Choosing specific tests for the current run or future runs.
Checking reagent availability and volumes for selected tests.
Initiating calibrations, controls, and patient sample analyses.
Ensuring the instrument cover is closed for safe operation.
Prioritizing and running urgent samples immediately.
Accessing and reviewing patient results after the analysis is complete.
Requesting re-analysis of tests after the run has finished.
Generating reports and printing patient results.
Routine tasks for maintaining the analyser daily.
Guidelines for scheduled preventive maintenance and record keeping.
