S12 Vet Monitor User’s Manual
1-6
Select this area to enter the【Patient Management】menu and detailed
description please
to refer Chapter 4 Patient Management.
2. Current configuration
3. Technical alarm area
Display technical alarm information and prompt information. Cyclic displaying when
there are multiple messages. Select this area to open the 【Alarm Informations】menu to
view the current technical alarm.
4. Physiological alarm area
Shows the physiological alarm messages, medium-level and low-level alarm
messages display on the left, while the high-level alarm messages display on the right.
Cyclic displaying when there are multiple messages. Select this area to open the 【Alarm
Informations】menu to view the current physiological alarm.
5. System status information area
Display alarm volume, network and storage devices connection status, battery and
system time. For the battery status icon
please to refer chapter 21 Battery.
6. Waveform area
Show the waveforms of physiological parameter. Label displays on the top left
corner of each waveform area. Select the waveform area of a parameter and enter the
corresponding parameter setting menu.
7. Parameter area
It consists of various parameter areas, and shows
parameter value, unit, alarm limit
and alarm status, etc. Label displays on the top left corner of each parameter area. Select
the parameter area of a parameter to enter the corresponding parameter setting menu.
8. Area of touch quick keys
Shows quick keys, these quick keys are used to conduct some common operations.
To Next Page
Loading...