S12 Vet Monitor User’s Manual
46
Item Default Setting
Cycle Record Duration 8s
Alarm Record Duration 8s
NIBP trigger OFF
C.14 Other
Item Default Setting
Keypad tone ON
Night
Mode
Brightness 1
Alarm volume 2
QRS volume 1
Touch Tone OFF
NIBP End
Tone
OFF
C.15 Maintenance Item
Item Default Setting
Network Type LAN
LAN IP Use the following IP address
Frequency 2.4G
Device No. 8
Alarm Pause Duration 2min
Minimum alarm volume 2
Alarm sound ISO
High Alarm Interval (s) 10
Medium Alarm Interval (s) 20
Low Alarm Interval (s) 20
Reset Remote Bed’s Alarm OFF
Alarm Reset By Other Bed OFF
Alarm Off ON
Reminder Interval 5min
To Next Page
Loading...