9
Tumbler Water Bottle
Cleaning
6. When cleaning done up the oxygen,
drain the water.
Do not drink water generated at this time.
※
Cautions
4. The light turns on as shown,
a red LED comes on, and when
oxygen is cleaned, the red LED
goes off with a beep.
The tumbler water bottle is
completely separated from the
main body, and a sponge brush or
a soft cloth wash it.
※ It takes 4 minutes to
clean once time.
3. Main unit again that is
connected to the water bottle
and lightly touch the O
2
button.
To Next Page
