EasyManua.ls Logo

BIOTRONIK CardioMessenger II-S User Manual

BIOTRONIK CardioMessenger II-S
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CardioMessenger
®
II-S
Transmitter for BIOTRONIK Home Monitoring
®
Technical Manual
362454_D_GA_CM_II-S_US.indd 1 17.04.08 16:28:16
Question and Answer IconNeed help?

Do you have a question about the BIOTRONIK CardioMessenger II-S and is the answer not in the manual?

BIOTRONIK CardioMessenger II-S Specifications

General IconGeneral
BrandBIOTRONIK
ModelCardioMessenger II-S
CategoryHealth Care Products
LanguageEnglish

Summary

Introduction to Home Monitoring

How Home Monitoring Works

Explains the daily transmission of heart data from implant to patient device via the CardioMessenger.

Setup and Placement

Placement Guidelines

Recommends placing the Cardio Messenger on a bedside table with specific distance requirements.

Connecting the Cardio Messenger

Connecting the Power Supply

Step-by-step guide to connect the Cardio Messenger to the power outlet.

Self-Test Procedure

Describes the automatic self-test sequence and indicator lights upon connection.

Operating the Device

Device Troubleshooting

Error Type A: Power Supply Check

Addresses issues when the operating light is off due to power supply problems.

Error Type B: Repeat Self-Test

Guides the user to repeat the self-test if both lights blink yellow.

Error Type C: Mobile Connection Check

Provides steps to check the mobile connection if the operating light stays yellow.

Safety, Compliance, and Warranty

General Safety Precautions

Warnings on operating locations, distances, and device integrity.

Technical Specifications