Need help?Do you have a question about the BIRD MicroBlender 3800 and is the answer not in the manual?
General| Brand | BIRD |
|---|---|
| Model | MicroBlender 3800 |
| Category | Industrial Equipment |
| Language | English |
Explains the function and operation of the balance module.
Details the function of the proportioning module and control knob.
Critical safety information regarding air supply and servicing.
Precautions for proper use, cleaning, and maintenance.
Points to assist operator understanding and improve usage.
Addresses issues with inaccurate oxygen concentration readings.
Provides solutions for when the alarm sounds unexpectedly.
Diagnoses issues where the blender bypasses without activating the alarm.
Solves accuracy problems linked to inlet gas pressure differences.
Step-by-step guide for reassembling the oxygen inlet.
Instructions for reassembling the primary outlet port.
Procedures for servicing the proportioning module.
Steps for taking apart and putting back together the alarm system.
Guide for assembling the balance block components.
Lists necessary tools and equipment for calibration.
Instructions for connecting and preparing gas supplies.
Details on setting up and calibrating the oxygen analyzer.
Steps to calibrate the proportioning valve for accurate settings.
Procedure for calibrating the audible alarm system.
Method to test for leaks in the inlet check valves.
Instructions for installing the control knob friction O-ring.
Verifies proper function of the alarm and bypass system.
Details of the parts included in the maintenance kit.
To Next Page