Bisonte BTA-12SDE - Technical Service and Long-Term Storage; Technical Service Schedule; Long-Term Storage Guidelines

of the diesel engine.
Ⅳ Technical Service List of Power tiller
(The mark O means the required service)
Work Interval
Items to service
Every
day
8 hours
under half
load
The 1
st
month or
after 20
hours
The 3
rd
month or
after 150
hours
Every year
or after 800
hours
Every two
years or after
2000 hours
Check and screw bolts
and nuts
O
Check and refill engine
oil
O
Clean and change the
oil
O (the 1
st
time)
O (the 2
nd
time)
O (the 3
rd
time)
Check oil leakage
O
Clean dirt, weeds and
smear to keep clean
O
Troubleshooting
O
Adjust the control
parts
O
Friction piece of the
clutch
O
Gears and bearings
O
Ⅴ Long-Term Storage of Power tiller
When the power tiller needs a long-term storage, the following measures should be adopted to
avoid rust.
1. The instruction manual of diesel engine requires to seal the diesel engine up for keeping
purpose.
2. Clean dust and dirt away from the surface of the machine.
3. Drain the lubricant from the gear-box and add new lubricant into it.
4. Paint anti-rust oil on the non-painted area of the non-aluminum surface
5. The machine should be kept in a ventilated, dry and soft place.
6. Keep well the self-contained tools, conformity certificate of product and instruction
manual.
Chapter Five Debugging Method of Power tiller
Ⅰ. Debugging Method of Mesh of Bevel Gear
When the abnormal transmission of mesh of bevel gear
of sound is confirmed, stop the machine and check as
stipulated below:
www.italiastar.ro
info@italiastar.ro
004/021.433.03.27
Italia Star Com Due S.R.L.
101