Italia Star Com Due S.R.L.
www.italiastar.ro
info@italiastar.ro
004/021.433.03.27
60
Static electricity can also build up in the item being painted. Make sure this is also
earthed.
Avoid spraying solvent oil its o\vn any more than required. Solvent can ignite.
The paint hose is specifically for that purpose. Do not use it for any other purpose
as this can lead to connection failure, leaking and cracking due to inadequate
pressure resistance or failure to earth due to poor conductivity
Part names, functions & basic operation
Warning!
The airless gun sprays at extremely high pressure and is dangerous. Never touch tip of gun (spray orifice) or
place it near the face.
Very high pressure is applied to paint hose. Do not twist, bend, flatten or cut with any sharp object. This could
lead to cracking and spray leakage.
When using this equipment always earth it. Failure to do so can lead to fire, explosion or electric shock.
Do not operate with the belt cover removed and do not poke sticks into the moving parts. Clothing or bands
may be dragged in.
FAILURE TO OBSERVE THESE WARNINGS CAN RESULT IN SERIOUS INJURY.
Caution!
Do not jolt or drop pressure gauge. The indicator may malfunction and cause a breakdown.
Do not use relief valve to regulate pressure. This will shorten life of relief valve.
Do no over-rotate pressure control valve beyond its maximum. This can lead.,to breakdown due to
excessively high pressure.
Operational procedures
Preparation
1. Make sure that paint hose, return
hose,airless gun and nozzle tip are all
properly connected.
2. Do not connect Oil gauge suction hose
yet.
3. Use oil gauge to check whether there is
any oil.
4. Carry out earth and check fuel.
5. If V-belt is slack, adjust to an
appropriate tension. (On the super K101G)
place your finger on the middle of the belt
and press firmly. Adjust until slack is about
5-6mm. However never do this white in
operation.
To Next Page
Loading...