Contents [ hide
1 Thanks for buying a BISSELL CleanView ®
2 IMPORTANT SAFETY INSTRUCTIONS
3 How To Use This Guide
4 How To Put It Together
4.1 Attach Handle To Vacuum
4.2 Attach Vacuum Hose and Tools
5 How To Use Your BISSELL CleanView ®
5.1 Handle Positions
5.2 Power Height Adjustment
5.3 Transporting Cleaner
5.4 Special On-Board Tools
5.5 Power Cord Storage
6 How to Maintain Your BISSELL CleanView ®
6.1 Empty Dirt Container
6.2 Cleaning The Upper Tank & Louvers
6.3 Cleaning The Pre-Motor and Post-Motor Filters
6.4 Check Rotating Floor Brush and Drive Belt
6.5 Replace Drive Belt
6.6 Replace Lightbulb
6.7 Clearing Clogs
7 Troubleshooting
8 Replacement Parts – BISSELL CleanView ® Series
9 BISSELL Consumer Services
10 Warranty
11 Related Manuals:
Thanks for buying a BISSELL CleanView ®
We’re glad you purchased a BISSELL CleanView Vacuum. Everything we know about floor care went
into the design and construction of this powerful, high-tech home vacuuming system.
Your BISSELL CleanView is well made, and we back it with a limited comprehensive one-year
warranty.We also stand behind it with a knowledgeable, dedicated Customer Service department, so,
should you ever have a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876.Today, BISSELL is a global leader in the
design,manufacture, and service of high quality homecare products like your BISSELL CleanView.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should be observed, including the following:
READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT VACUUM.
Always connect to a polarized outlet (left slot is wider than right). Unplug from outlet when not in use
and before conducting maintenance.
To Next Page
Loading...
