1. Place Handle in Upright Position.
2. Turn Height Adjustment knob to desired setting.
Lowest Setting -For bare floors.
Medium Settings-For short and medium pile carpets.
Highest Setting -For plush pile carpet.
3. Place the Handle into the Normal Cleaning Position and the Powerfoot will adjust to the setting
chosen.
NOTE: You may also adjust the setting while in the Normal Cleaning Position.
Tip:
Before cleaning under low furniture, check area first for objects that might harm the unit or block the
Vacuum Hose.
Tip:
Your BISSELL CleanView features a Quick-Release Cord Wrap. To remove the Power Cord quickly and
easily, rotate the Upper Cord Wrap towards floor, and slip Power Cord from Upper and Lower Cord
Wraps.
Transporting Cleaner
1. To move your cleaner from room to room, put the Handle in the upright position, tilt the cleaner
back on its rear wheels and push forward.
2. The cleaner can also be moved by using the Carrying Handle.
Special On-Board Tools
Your BISSELL CleanView is not only a powerful carpet and rug vacuum cleaner,it’s also a versatile
above floor vacuum cleaner when you select one of the special tools.
To Next Page
Loading...
