Bissell PET HAIR ERASER 2475 Series User Manual (English)

Questions and Answers:

D
dcruzAug 14, 2025
How to fix Bissell PET HAIR ERASER 2475 Pet Care Product brush roll that doesn’t rotate?
- E
  Evan HessAug 14, 2025
  If the brush roll on your Bissell Pet Care Product isn’t rotating, there are a few things to check: * First, ensure the Brush Roll On/Off Switch is turned on. * Second, make sure the vacuum isn't locked in the upright position; recline it and turn on the Brush Roll. * Third, if you're vacuuming on soft carpet, adjust the Suction Control to reduce suction. * Finally, unplug the vacuum to reset the brush motor and remove any debris or entanglements from the Brush Roll before turning it back on.
M
mcleanlauraAug 19, 2025
What to do if dirt is escaping from my Bissell PET HAIR ERASER 2475 Pet Care Product vacuum?
- P
  Priscilla ChaneyAug 19, 2025
  If dirt is escaping from your Bissell Pet Care Product vacuum, the Dirt Tank may be full, so empty it. Also, check to ensure all filters are present and clean them if they are dirty.
R
ruizjenniferAug 25, 2025
Why is my Bissell PET HAIR ERASER 2475 vacuum hard to push or pull?
- A
  Angela LongAug 25, 2025
  If your Bissell Pet Care Product vacuum is hard to push or pull, the suction might be set too high. Adjust the suction using the Suction Control on the Handle.
S
Shane GonzalesAug 30, 2025
How to stop high-pitched noise in Bissell PET HAIR ERASER 2475?
- K
  kdavisAug 30, 2025
  If your Bissell Pet Care Product is making a high-pitched noise, check inside the Stretch Hose and lower hose for clogs by disconnecting them from the vacuum.
J
Jeremy HeathSep 3, 2025
Why doesn't the hose on my Bissell PET HAIR ERASER 2475 Pet Care Product pick up dirt?
- R
  Reginald Brown IVSep 3, 2025
  If the hose on your Bissell Pet Care Product isn’t picking up dirt, the suction may be set too low. Adjust it using the Suction Control on the Handle.