3. To fill the water tank, remove grey rubber nozzle on the back of the water tank.
4. Fill water tank with distilled or demineralized water, recommended in place of tap water. Place the nozzle back into the
water tank after filling and return tank to machine.
A few notes about fi lling the Water Tank:
• The Water Tank’s capacity is 300 mL (10 oz). DO NOT USE CHEMICALS IN THE WATER TANK OF YOUR POWERFRESH®
2 IN 1 STEAM MOP.
TIP: Use of distilled water or demineralized water is recommended to prolong the life of your hard floor cleaner.
Cleaning Your Hard Floors
NOTE: Before you clean, thoroughly sweep or vacuum floor prior to cleaning with your PowerFresh® 2 in 1 Steam Mop. Your
hard floor cleaner is designed to clean hard fl ooring, such as ceramic tile, marble, stone and sealed hard wood floors. Use on
waxed or some unwaxed floors may result in a diminished glossiness. The hard floor cleaner is not for use on unsealed wood
floors. For best results, test in an inconspicuous area and check the care instructions from your flooring manufacturer
1. Attach mop pad by wrapping around bottom of foot, making sure gray stitching is located on the front of foot and the quick
grip release tab is located on the back.
To Next Page
Loading...
