Why does my Bissell POWERFRESH VAC & STEAM 2747 have low suction?
Your Bissell Vacuum Cleaner may have low suction for several reasons. The dirt tank might be full and needs emptying. Ensure the dirt tank is correctly installed and the lock button is properly positioned. Also, check that the foot is fully inserted into the body of the unit. The filters may need cleaning; follow the filter instructions to clean them.
What to do if visible dirt is escaping from Bissell POWERFRESH VAC & STEAM 2747?
If you see dirt escaping from your Bissell Vacuum Cleaner, the dirt tank may be full and needs to be emptied. Check the filter to ensure it is installed correctly. Also, make sure the dirt tank is properly installed and the lock button is correctly positioned.
How to fix reduced steam or no steam in Bissell POWERFRESH VAC & STEAM 2747 Vacuum Cleaner?
If your Bissell Vacuum Cleaner has reduced or no steam, the water tank may be empty and needs to be filled. Ensure that you have selected a steam level by pushing the steam level button.
General| Model Number | 2747 Series |
|---|---|
| Voltage | 120 V |
| Cord Length | 25 feet |
| Steam Time | 30 minutes |
| Steam Ready Time | 30 seconds |
| Power Source | Corded Electric |
| Cleaning Path Width | 12 inches |
| Included Accessories | Microfiber Pads |
Key safety guidelines for operating the hard floor cleaner, covering usage, handling, and precautions.
Crucial information on proper grounding and electrical safety to prevent shocks.
Alerts users that the appliance surface may become hot and to avoid contact.
Identifies and lists all parts of the BISSELL PowerFresh Vac & Steam Hard Floor Cleaner.
Covers suffocation, initial use, and electrical safety precautions before operation.
Step-by-step guide on how to connect the handle, body, and foot of the cleaner.
Guidance on selecting steam levels, using the vacuum, and general operating precautions.
Detailed instructions on how to attach the microfiber mop pad to the foot tray.
Guidance on how to fill the water tank with water at room temperature for optimal cleaning.
Instructions for connecting the power cord and notes about initial pump sounds.
Instructions on using steam, vacuum, cleaning, and refilling the water tank.
Guidance on sanitizing an area, pad care, and the thermal protector feature.
Steps to safely remove, wash, and dry the microfiber mop pads after use.
Instructions on how to properly remove and empty the dirt tank and clean it.
Warns about potential white marks on floors from upright storage with a wet mop pad.
Steps for cleaning foam filters and replacing paper filters for peak vacuum performance.
Instructions on how to detach, wash, and reattach the hose tube for maintenance.
Steps to detach, wash, and reattach the foot and bristles, checking for nozzle clogs.
Identifies causes and remedies for low suction, such as full dirt tank or loose foot.
Addresses causes and solutions for dirt escaping, like incorrect filter or tank installation.
Explains reasons for no steam, like empty water tank or unselected steam level, and their fixes.
Details legal rights, limitations, and coverage for the BISSELL product.
Specifies coverage, exclusions, and duration for defects and malfunctions.
Guidance on where to obtain service, locate authorized centers, and contact BISSELL.
Provides contact details (website, email, phone) for inquiries and support.
Benefits of registering, including rewards points, faster service, and product alerts.
Information on how to find and purchase replacement parts and cleaning supplies.
Encourages users to leave star ratings and share their experience with BISSELL products.
To Next Page