BIXOLON BCD-2000 Installation Guide & Safety Guide

◈ Information
This Installation Guide includes a brief outline of information necessary for product
installation. For more detailed installation information, please refer to the user manual in the
enclosed CD. The contents of the CD include the following.
1. Manual: User Manual, Command Manual, Code Page, Software Manuals
2. Drivers: Windows Drivers, OPOS Drivers, VCOM(USB) Drivers
3. SDK: mPOS SDK (Android, Windows, iOS)
4. Utility: Customer Display Utility
We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and quality
of all our products. In following, product specifications and/or user manual content may be
changed without prior notice.
◈ Product Models & Components
BCD-2000A BCD-2000AU BCD-2000N BCD-2000NU BCD-2000DS
BCD-2000WA BCD-2000WAU BCD-2000WN BCD-2000WNU BCD-2000WS
Common Components of All Products
CD Installation Guide
Screws
M3*10,Tapping 4 ea
◈ Initial Settings & Options (Serial)
1. Direct Connection: Connected to the Display directly without passing through the board.
Ite
m
Dis
p
la
y
- Serial
Standard
Model
BCD-2000N BCD-2000
A
How to
Connect a
Power Cable to
the Serial
Cable
Connect an SMPS to the Serial Cable Jack
Voltage Used: 24V (2pin)
BCD-2000N+SMPS
2. Pass Through: Data transmits through Host(PC) → Display → Printer.
Ite
m
Dis
p
la
y
-Serial
Standard
Model
BCD-2000DS
Standard
Board
Specificati
ons
Power
(Optional)
24V, 2.5A 24V, 1.5A
Cable
Types
(Optional)
Serial Cable 9PM to 25PF
Power Cable 3P to 3P
Power Cable 3P to 2P
◈ Connection Types (BCD-2000A/N/DS/WA/WN/WDS)
Standard
Components
(Host PC Side)
▼
(Printer Side)
▼
(Display Side)
▼
Interface
A B C D E F
Power
Connection 1
(Separate power
supply needed
for
Rinter/Display)
-
24VDC
or
Power
Connection 2
(SMPS→Display
→Printer)
-
24VDC
Power
Connection 3
(SMPS→Display
→Printer)
-
24VDC
Serial Cable
Connection 1
(Host→Display
→Printer)
Serial Cable
Connection 2
(Host→Printer)
(Host→Display)
Misc.
A: Power Supply Connector (Output 24VDC, 3pin)
B: Host Interface Connector (D-SUB 25pin, Female)
C: Power Supply Connector (Input 24VDC, 2pin)
D: Display Connector
E: Printer Interface Connector (D-SUB 9pin, Male)
F: Power Su
pp
l
y
Connector
(
In
p
ut 24VDC, 3
p
in
)
◈ How to Connect (BCD-2000AU/NU/WAU/WNU)
1. Install the USB Virtual COM driver.
2. Connect the display cable to a computer via a USB port.
3. Turn on the PC and display. The PC will automatically detect new hardware connected to
the USB port.
4. Once the driver is installed, the display is ready to receive data.
◈ Swivel
This device can be swiveled freely. Please follow the instructions below to avoid damage or
malfunction when installing the device. To change the direction of the display after
installation, follow the instructions provided below.
(a) (b) (c)
Display Installation Guide & Safety Guide
KN10-00006A (Rev.1.1)
CUSTOMER DISPLAY BCD-2000
Pole Adjustable Ball
N
ut Holder
Pole-Main
3 pin
3 pin
2 pin
3 pin
25 pin
9 pin
25 pin
9 pin
9 pin
25 pin
25 pin
9 pin

BIXOLON BCD-2000 Specifications

General

Brand	BIXOLON
Model	BCD-2000
Category	Monitor
Language	English