Black & Decker 200 WATT User Manual

Accessories
Recommended accessories for use with your tool are available from your local dealer or authorized service
center. If you need assistance regarding accessories, please call: 1-800-544-6986.
WARNING: The use of any accessory not recommended for use with this tool could be hazardous.
SPECIFICATIONS
Maximum Continuous Power: 200 watts
Surge Capacity: 400 watts
)Am003( CD V 5:tuptuO BSU
spma 8:teltuO CD
stlov 8.21:egatloV tupnI
Output Voltage: Approx. 115 volt AC RMS 60 Hz
Low Voltage Alarm: < 10.7 volts DC
Low Voltage Shutdown: 10.5 ± 0.3 volts DC
Thermal Shutdown: Automatic
)WSM( evaW eniS deifidoM:mroF evaW
Output Connection: North American Standard Receptacles
spma 8 :gulP yrosseccA CD / lanretnI :sesuF
selbac pilc yrettaB:selbaC tupnI
Operating Temperature: 10-20°C (50-68°F)
Storage Temperature: 0-40°C (32-104°F)
Operating/Relative Humidity: 5-95% non-condensing
8
PI200AB_ManualEN_060807.qxp 6/8/2007 4:48 PM Page 8

Black & Decker 200 WATT Specifications

Power

maximum continuous power	200 watts
surge capacity	400 watts
output voltage	Approx. 115 volt AC RMS 60 Hz
low voltage alarm	< 10.7 volts DC
low voltage shutdown	10.5 ± 0.3 volts DC

Ports & interfaces

usb output	5V DC( 300mA)
output connection	North American Standard Receptacles

Operating Environment

operating temperature	10-20°C (50-68°F)
storage temperature	0-40°C (32-104°F)
operating/relative humidity	5-95% non-condensing