Black & Decker 5014 User Manual

Discusses requirements for extension cords, including wire size and outdoor suitability.

Explains the rotation of the side handle and emphasizes its necessity during operation.

Details how to adjust the depth rod for desired drilling depth using figures.

Explains the variable speed trigger switch for controlling tool operation and speed.

Details the procedure for inserting and releasing SDS bits from the tool.

Explains the function and operation of the reversing switch for different models.

Guides on using the selector lever to switch between hammer drilling and drilling modes.

Provides instructions for drilling, including bit selection and material clamping.

Outlines periodic maintenance tasks like cleaning air slots and checking cords.

Informs about the availability of recommended accessories and how to obtain them.

Details the free one-year service/safety check program offered by B&D.

Outlines the warranty coverage for defects in materials and workmanship.

Lists conditions under which the warranty and service check do not apply.