EasyManua.ls Logo

Black & Decker F505S - How to Use Your Iron; Before First Use

Black & Decker F505S
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
®
BEFORE FIRST USE
IMPORTANT: Follow this procedure before first
use.
1. Remove any labels, stickers, or tags which
may be attached to the body or soleplate of
the iron. NOTE: Do Not Remove the
Mercury warning label from the cordset
(Certain Models Only).
2. Fill the Water Tank about 1/3 full with water.
(See “Filling With Water.”)
3. Plug the iron into a standard electrical outlet.
4. Set the Temperature Selector Dial to the
Cotton or Linen settings (6 or 7) and preheat
for about 2 minutes. (See “Starting The Iron”)
5. While ironing on an old cotton terry cloth
towel for about 2 minutes, try using the
iron’s spray feature by pumping the SPRAY
” button and different steam settings by
turning the Adjustable Steam Dial. For irons
with Surge of Steam, turn the Spray/Surge
button so that the word SURGE or the steam
PUFF “ ” is toward the front of the iron.
For model F612 only, you must flip the
Surge/Spray Switch at the side of the iron
up to SURGE. Pump theSPRAY/SURGE
button a few times.
ANTES DE USAR LA PLANCHA POR
PRIMERA VEZ:
IMPORTANTE: Siga el proceso a continuación.
1. Retire cualquier etiqueta o calcomanía
adherida al cuerpo o a la suela de la plancha.
NOTA: No retire la etiqueta en el cable
referente al mercurio (en ciertos modelos
únicamente).
2. Llene 1/3 del tanque con agua. Consulte la
sección de llenado.
3. Enchufe la plancha a una toma de corriente
estándar.
4. Ajuste el control de temperatura para
algodón o lino entre el 6-7 y permita que se
caliente unos 2 minutos. Consulte la sección
en como encender la plancha.
5. Mientras plancha sobre un paño de algodón
o una toalla por 2 minutos, trate de bombear
el botón SPRAY (rocío) “ girando el
control hacia diferentes niveles. Para las
planchas que emiten un impacto de vapor,
gire el botón de vapor y rocio de modo que la
palabra SURGE o PUFF (emisión de vapor)
queden hacia el frente de la plancha.
Para el modelo F612 únicamente, deberá
subir el interruptor para rocío y vapor en el
costado de la plancha a la posición SURGE.
Bombee el botón SPRAY/SURGE unas
cuantas veces.
A
B
®
C
®
D
HOW TO USE YOUR IRON
COMO USAR LA PLANCHA
2

Related product manuals