To Next PageTo Next Page
Need help?Do you have a question about the Black & Decker FireStorm FS300DP and is the answer not in the manual?
General| Type | Drill/Driver |
|---|---|
| Voltage | 18V |
| Chuck Size | 3/8 inch |
| Battery Type | NiCad |
| Power Source | Battery |
Defines hazard alert symbols (DANGER, WARNING, CAUTION) used throughout the manual for safety communication.
Lists essential safety precautions, including guarding, PPE, tool handling, and workspace safety.
Continues essential safety rules, covering unintentional starting, tool stability, maintenance checks, and environmental hazards.
Provides specific safety rules for drill press operation, including assembly, setup, bit usage, and workpiece handling.
Warns about electrical hazards, shock risks, and precautions when operating the machine in damp locations or near water.
Details the importance and procedure for grounding the machine to prevent electric shock, including adapter use.
Provides guidelines for selecting the correct gauge and type of extension cord based on length and current.
Introduces the FS300DP drill press, mentioning its motor and work lamp features.
Guides users through unpacking the machine, removing protective coatings, and initial cleaning procedures.
Identifies and lists all major components of the drill press with reference to a diagram.
Lists the necessary tools for assembly and provides an estimated assembly time for the drill press.
Details the initial assembly steps involving the column, base, worm gear, and raising rack.
Continues assembly by detailing the attachment of the table, bracket, ring, and raising handle.
Describes the process of attaching the drill press head, clamp handle, and pinion shaft handles.
Details the crucial steps for cleaning and installing the spindle taper and chuck onto the drill press.
Provides instructions on how to secure the drill press base to a supporting surface to prevent tipping or movement.
Explains how to operate the main power switch to turn the drill press ON and OFF.
Details the procedure for locking the power switch in the 'OFF' position to prevent unauthorized use.
Explains how to operate the flexible work lamp and specifies the recommended bulb type and wattage.
Guides users on adjusting the table height, angle, and rotation for various drilling operations.
Describes how to tilt the table to specific angles and use the alignment pin for 90-degree positioning.
Illustrates the motor and spindle pulley steps required to achieve different spindle speeds (RPMs).
Provides a step-by-step guide for adjusting belt tension after changing spindle speeds.
Explains how to use the depth stop feature for drilling multiple holes to a precise, consistent depth.
Details the procedure for adjusting the spindle return spring tension if factory settings need modification.
Offers general advice on workpiece positioning, using scrap material, and accessory safety.
Provides a step-by-step guide for inserting, centering, and securing drill bits in the chuck.
Discusses factors influencing drilling speed and offers specific techniques for working with wood and metal.
A chart detailing recommended operating speeds (RPMs) for various drill bits and accessories across different materials.
Covers accessory recommendations, warnings, tool cleaning, and information on finding authorized service centers.
Details the two-year home use warranty and clarifies terms for contractor use of the product.
