Black & Decker GK1940T - Protecting the Environment

12
ENGLISH
(Original instructions)
u Oil sprocket nose via the sprocket lubrication hole (16).
This ensures an even distribution of wear around the
guide bar rails.
Saw chain sharpening
If you are to get the best possible performance from the tool
it is important to keep the teeth of the saw chain sharp.
Guidance for this procedure is found on the sharpener
package. For this purpose we recommend the purchase of
the Black & Decker saw chain sharpening kit (available from
Black & Decker service agents and selected dealers).
Replacing worn out saw chains
Replacement saw chains are available through retailers or
Black & Decker service agents. Always use genuine spare
parts.
Saw chain sharpness
The saw chain cutters will blunt immediately if they touch the
ground or a nail while cutting.
Saw chain tension
Regularly check the saw chain tension.
What to do if your chainsaw needs repair.
Your chainsaw is manufactured in accordance with the
relevant safety requirements. Repairs should only be carried
out by a qualied person using original spare parts otherwise
this may result in considerable danger to the user. We
recommend you keep this user manual in a safe place.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be tted:
u Safely dispose of the old plug.
u Connect the brown lead to the live terminal in the new
plug.
u Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the tting instructions supplied with good quality
plugs. Recommended fuse: 10 A.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you nd one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker ofce at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical data
GK1935T GK2235T
Typ. 3
Bar length cm 35 35
Voltage V
AC
230 230
Power input W 1900 2200
Chain speed (no load) m/s 9.5 12.5
Max cutting length cm 35 35
Oil capacity ml 250 250
Weight kg 5.2 5.3
Safety class II II
GK1940T GK2240T
Bar length cm 40 40
Voltage V
AC
230 230
Power input W 1900 2200
Chain speed (no load) m/s 9.5 12.5
Max cutting length cm 40 40
Oil capacity ml 250 250
Weight kg 5.2 5.3
Safety class II II
Typ. 3
Typ. 3 Typ. 3