22
ENGLISH
TROUBLESHOOTING
Problem Passible cause Possible solution
• Unit will not start. • Cord not plugged in. • Plug tool into a working outlet.
• Circuit fuse is blown. • Replace circuit fuse.
(If the product repeatedly causes
the circuit fuse to blow, discontinue
use immediately and have it
serviced at a Black&Decker
service center or authorized
servicer.)
• Circuit breaker is tripped. • Reset circuit breaker.
(If the product repeatedly causes
the circuit breaker to trip,
discontinue use immediately and
have it serviced at a Black&Decker
service center or authorized
servicer.)
• Cord or switch is damaged. • Have cord or switch replaced at
Black&Decker Service Center or
Authorized Servicer.
To Next Page
Loading...
