3. Is the Temperature Selector
Dial turned to a fabric setting?
1. Check to see if there is enough
water in the Water Tank.
2. Is the Adjustable Steam Dial set
at , , or ? Adjust the
Dial to Dry and back to the desired
steam level several times.
3. Is the Temperature Selector Dial
set to the steam area (settings 4
thru 7)?
4. If steaming doesn’t start, gently
tap the Soleplate on the ironing
board once or twice.
1. Is the Temperature Selector Dial
set in a steam area (somewhere
between settings 4 and 7)?
2. Is the Adjustable Steam Dial set
at the corresponding , , or
steam setting?
1. Has the iron been plugged in for
an hour? This iron will shut off after
an hour whether or not you have
been using it.
2. Press the PUSH ON Button in to
restart the iron.
12
IRON WON’T
START
STEAMING?
WATER
DROPLETS
COMING FROM
STEAM VENTS?
SHUTS OFF
AUTOMATICALLY
WHILE IRONING?
To Next Page
Loading...
