24 • ENGLISH
MAINTENANCE (Fig. E)
Any maintenance operations not covered by this chapter should
be carried out by an Authorized sales and service Centre.
Caution! Always disconnect the plug from the power
socket before carrying out any work on the appliance.
Cleaning the nozzle
1. Disconnect the lance from the nozzle.
2. Remove any dirt deposits from the nozzle hole using
the tool (7).
Cleaning the filter
Inspect the intake filter (15) and detergent filter (if fitted)
before each use, and clean in accordance with the
instructions if necessary.
Unjamming the motor (On models with this feature)
In case of lengthy stoppages, limescale sediments may
cause the motor to seize. To unjam the motor, turn the
drive shaft with a tool.
End-of-season storage
Treat the appliance with non-corrosive, non-toxic antifreeze
and lubricate the o-rings using the lubricating grease tube
(where sup- plied) as shown before storing it away for winter.
Put the appliance in a dry place, protected from frost.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned and
authorized service locations. All BLACK+DECKER Service
Centers are staffed with trained personnel to provide customers
with efficient and reliable power tool service. For more
information about our authorized service centers and if you
need technical advice, repair, or genuine factory replacement
parts, contact the BLACK+DECKER location nearest you, or
visit us at www.BlackandDecker-la.com
SPECIFICATIONS PW1800SPL
AR, B2C 220V ~ 50Hz B3 120V ~ 60Hz B2 220V ~ 60Hz BR 127V ~ 60Hz
Power 1800W 1800W 1800W 1800W
Working flow 5,5 l/min 5,5 l/min 5,5 l/min 5,5 l/min
Max water flow 7,33 l/min 7,33 l/min 7,33 l/min 7,33 l/min
Pressure 9,5 MPa (95 bar) 9,5 MPa (95 bar) 9,5 MPa (95 bar) 9,5 MPa (95 bar)
Maximum pressure 14 MPa (140 bar) 14 MPa (140 bar) 14 MPa (140 bar) 14 MPa (140 bar)
PSI 2030 2030 2030 2030
T° input 50 ºC 50 ºC 50 ºC 50 ºC
Maximum input pressure 1 MPa 1 MPa 1 MPa 1 MPa
Repulsive force of the gun to
the maximum pressure
12,64 N 12,64 N 12,64 N 12,64 N
Motor insulation Class F Class F Class F Class F
Motor protection IPX5 IPX5 IPX5 IPX5
Sound level K=3 dB(A):
LPA (EN 60704-1) 78,77 dB(A) 78,77 dB(A) 78,77 dB(A) 78,77 dB(A)
LWA (EN 60704-1) 87 dB(A) 87 dB(A) 87 dB(A) 87 dB(A)
Unit vibrations (K=1,5 m/s
2
) 3,72 m/s
2
3,72 m/s
2
3,72 m/s
2
3,72 m/s
2
Weight 8,6 kg 8,6 kg 8,6 kg 8,6 kg
To Next Page
Loading...
