105
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
3.12 LLDP
The switch supports the LLDP. For current information on your switch model, the Link Layer Discovery Protocol (LLDP) provides
a standards-based method for enabling switches to advertise themselves to adjacent devices and to learn about adjacent LLDP
devices. The Link Layer Discovery Protocol (LLDP) is a vendor-neutral Link Layer protocol in the Internet Protocol Suite used
by network devices for advertising their identity, capabilities, and neighbors on a IEEE 802 local area network, principally wired
Ethernet. The protocol is formally referred to by the IEEE as Station and Media Access Control Connectivity Discovery specified in
standards document IEEE 802.1AB.
3.12.1 LLDP CONFIGURATION
You can set LLDP configuration and the detail parameters per port and the settings will take effect immediately. This page allows
the user to inspect and configure the current LLDP port settings.
WEB INTERFACE
To configure LLDP:
1. Click LLDP configuration.
2. Modify LLDP timing parameters.
3. Set the required mode for transmitting or receiving LLDP messages.
4. Specify the information to include in the TLV field of advertised messages.
5. Click Apply.
FIGURE 3-65. LLDP CONFIGURATION SCREEN
CHAPTER 3: SYSTEM CONFIGURATION
To Next Page
Loading...
