11
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
CHAPTER 3: SYSTEM CONFIGURATION
This chapter describes basic configuration tasks, including the System Information and switch management (e.g. Time, Account,
IP, Syslog and NTP.)
3.1 S Y S T E M
You can identify the system by configuring the contact information, name, and location of the switch.
3.1.1 INFORMATION
The switch system’s contact information is provided here.
WEB INTERFACE
To configure System Information in the web interface:
1. Click Configuration, System, and Information.
2. Type in System Contact, System Name, and System Location information in this page.
3. Click Apply.
FIGURE 3-1. SYSTEM INFORMATION SCREEN
Parameter description:
System Contact: The textual identification of the contact person for this managed node, together with information on how to
contact this person. The allowed string length is 0 to 128, and the allowed content includes ASCII characters from 32 to 126.
System name: An administratively-assigned name for this managed node. By convention, this is the node’s fully qualified domain
name. A domain name is a text string drawn from the alphabet (A-Z, a-z), digits (0-9), and minus sign (-). No space characters are
permitted as part of a name. The first character must be an alpha character. And the first or last character must not be a minus
sign. The allowed string length is 0 to 128.
System Location: The physical location of this node(e.g., telephone closet, 3rd floor). The allowed string length is 0 to 128, and the
allowed content is ASCII characters from 32 to 126.
To Next Page
Loading...
