123
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
3.16.3 IP SUBNET-BASED VLAN
The IP subnet-based VLAN entries can be configured here. This page allows for adding, updating, and deleting IP subnet-based VLAN
entries and assigning the entries to different ports. This page shows only static entries.
Web Interface
To Display IP subnet-based VLAN Membership to configured in the web interface:
1. Click VCL, Group Name VLAN configuration, and add new entry.
2. Specify the VCE ID, IP Address, Mask Length, VLAN ID, and select Port Members.
3. Click Apply.
FIGURE 3-74. IP SUBNET-BASED VLAN MEMBERSHIP CONFIGURATION SCREEN
Parameter description:
Delete: To delete a IP subnet-based VLAN entry, check this box and press save. The entry will be deleted on the selected switch in the
stack.
VCE ID: Indicates the index of the entry. It is user configurable. Its value ranges from 0–128. If a VCE ID is 0, the application will auto-
generate the VCE ID for that entry. Deletion and lookup of IP subnet-based VLAN are based on VCE ID.
IP Address: Indicates the IP address.
Mask Length: Indicates the network mask length.
VLAN ID: Indicates the VLAN ID, which can be changed for the existing entries.
Port Members: A row of check boxes for each port is displayed for each IP subnet-based VLAN entry. To include a port in a IP subnet-
based VLAN, check the box. To remove or exclude the port from the IP subnet-based VLAN, make sure the box is unchecked. By
default, no ports are members, and all boxes are unchecked.
Adding a New IP subnet-based VLAN: Click “Add New Entry” to add a new IP subnet-based VLAN entry. An empty row is added to the
table, and the IP subnet-based VLAN entry can be configured as needed. Any IP address/mask can be configured for the IP subnet-
based VLAN entry. Legal values for a VLAN ID are 1 through 4095.
The IP subnet-based VLAN entry is enabled on the selected stack switch unit when you click on “Save.” Use the “Delete” button to
undo the addition of new IP subnet-based VLANs. The maximum possible IP subnet-based VLAN entries are limited to 128.
CHAPTER 3: SYSTEM CONFIGURATION
To Next Page
Loading...
