146
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
Mirror Port Configuration
Port: The logical port for the settings contained in the same row.
Mode: Select mirror mode.
Rx only: Frames received on this port are mirrored on the mirror port. Frames transmitted are not mirrored.
Tx only: Frames transmitted on this port are mirrored on the mirror port. Frames received are not mirrored.
Disabled: Neither frames transmitted nor frames received are mirrored.
Enabled: Frames received and frames transmitted are mirrored on the mirror port.
NOTE: For a given port, a frame is only transmitted once. It is therefore not possible to mirror Tx frames on the mirror port. Because
of this, the mode for the selected mirror port is limited to Disabled or Rx only.
Buttons:
- Apply – Click to save changes.
- Reset - Click to undo any changes made locally and revert to previously saved values.
3.20 UPNP
UPnP is an acronym for Universal Plug and Play. The goals of UPnP are to allow devices to connect seamlessly and to simplify the
implementation of networks in the home (data sharing, communications, and entertainment) and in corporate environments for
simplified installation of computer components.
WEB INTERFACE
To configure the UPnP Configuration in the web interface:
1. Click Configuration, UPnP.
2. Scroll to select the mode to enable or disable.
3. Specify the parameters in each blank field.
4. Click save to save the setting.
5. To cancel the setting, click the Reset button. It will revert to previously saved values.
FIGURE 3-92. UPNP CONFIGURATION SCREEN
CHAPTER 3: SYSTEM CONFIGURATION
To Next Page
Loading...
