150
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
3.22 SFLOW
The sFlow Collector configuration for the switch can be monitored and modified here. The configuration is divided into two parts:
Configuration of the sFlow receiver (a.k.a. sFlow collector) and configuration of per-port flow and counter samplers.
sFlow configuration is not saved to non-volatile memory, which means that a reboot or master change will disable sFlow sampling.
WEB INTERFACE
To configure the sFlow Agent in the web interface:
1. Click Configuration, sFlow.
2. Set the parameters.
3. Click save to save the setting.
4. To cancel the setting, click the Reset button. It will revert to previously saved values.
FIGURE 3-95. SFLOW CONFIGURATION SCREEN
FIGURE 3-96. PORT CONFIGURATION SCREEN
CHAPTER 3: SYSTEM CONFIGURATION
To Next Page
Loading...
