Black Box LGB1126A-R2 - Log

159
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
CHAPTER 4: MONITOR
4.1.3 LO G
This section describes the switch’s system log information.
WEB INTERFACE
To display the log configuration in the web interface:
1. Click Monitor, System, and Log.
2. Display the log information.
FIGURE 4-3. SYSTEM LOG INFORMATION SCREEN
Parameter description:
 Auto-refresh: Click the auto-refresh icon and the device will refresh the log automatically.
 Level: This is the level of the system log entry. Two types are supported: Warning and Error.
- Warning: Warning level of the system log.
- Error: Error level of the system log. All: All levels.
 ID: ID (>= 1) of the system log entry.
 Time: This will display the log record by device time. The time of the system log entry.
 Message: This will display the log detail message. The message of the system log entry.
 Buttons:
- Auto-refresh: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
- Refresh: Updates the system log entries, starting from the current entry ID.