162
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
CHAPTER 4: MONITOR
4.3 PORTS
The section describes how to configure the Port detail parameters of the switch. You can use the Port configure to enable or
disable the Port of the switch. Monitor the ports content or status in the function.
4.3.1 TRAFFIC OVERVIEW
The section describes provides an overview of general traffic statistics for all switch ports.
WEB INTERFACE
To Display the Port Statistics Overview in the web interface:
1. Click Monitor, Port, then Traffic Overview.
2. To auto-refresh, click on “Auto-refresh.”
3. Click “Refresh” to refresh the port statistics or clear all information when you click “ Clear”.
FIGURE 4-6. PORT STATISTICS OVERVIEW SCREEN
Parameter description:
Port: The logical port for the settings contained in the same row.
Packets: The number of received and transmitted packets per port.
Bytes: The number of received and transmitted bytes per port.
Errors: The number of frames received in error and the number of incomplete transmissions per port.
Drops: The number of frames discarded due to ingress or egress congestion.
Filtered: The number of received frames filtered by the forwarding.
To Next Page
Loading...
