Black Box LGB1126A-R2 - SFP Information

168
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
CHAPTER 4: MONITOR
4.3.5 SFP INFORMATION
The section describes how to display information for the SFP module connected to the switch. The information includes: Connector
type, Fiber type, wavelength, baud rate and Vendor OUI etc.
WEB INTERFACE
To display the SFP information in the web interface:
1. Click Monitor, then SFP Informatio.
2. To display the SFP Information.
FIGURE 4-11. SFP INFORMATION OVERVIEW SCREEN
Parameter description:
 Connector Type: Display the connector type, for instance, UTP, SC, ST, LC and so on.
 Fiber Type: Display the fiber mode, for instance, Multi-Mode, Single-Mode.
 Tx Central Wavelength: Display the fiber optic transmitting central wavelength, for instance, 850 nm, 1310 nm, 1550 nm, and so on.
 Baud Rate: Display the maximum baud rate of the fiber module supported, for instance, 10M, 100M, 1G, and so on.
 Vendor OUI: Display the OUI code assigned by IEEE.
 Vendor Name: Display the company name of the module manufacturer.
 Vendor P/N: Display the module part number.
 Vendor Revision: Display the module revision.
 Vendor Serial Number: Show the serial number assigned by the manufacturer.
 Date Code: Show the date this SFP module was made.
 Temperature: Show the current temperature of SFP module.
 Vcc: Show the working DC voltage of SFP module.