Black Box LGB1126A-R2 - Nas

178
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
CHAPTER 4: MONITOR
 Buttons:
- Auto-refresh: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
- Refresh: Click to refresh the page.
4.5.2.2 NAS
SWITCH
This section describes how to show the each port NAS status information of the switch.The status includes Admin State Port State,
Last Source, Last ID, QoS Class, and Port VLAN ID.
WEB INTERFACE
To configure a NAS Switch Status Configuration in the web interface:
1. Click Security, Network, NAS, then Port.
2. Check Auto-refresh.
3. Click Refresh to refresh the port detailed statistics.
FIGURE 4-21. NETWORK ACCESS SERVER SWITCH STATUS SCREEN
Parameter description:
 Port: The switch port number. Click to navigate to detailed NAS statistics for this port.
 Admin State: The port‘s current administrative state. Refer to NAS Admin State for a description of possible values.
 Port State: The current state of the port. Refer to NAS Port State for a description of the individual states.
 Last Source: The source MAC address carried in the most recently received EAPOL frame for EAPOL-based authentication, and the
most recently received frame from a new client for MAC-based authentication.
 Last ID: The user name (supplicant identity) carried in the most recently received Response Identity EAPOL frame for EAPOL-based
authentication, and the source MAC address from the most recently received frame from a new client for MAC-based authentication.