199
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
CHAPTER 4: MONITOR
4.6.3 PORT STATISTICS
This section describes how to set LACP function on the switch, then it provides a Port Statistics overview for all LACP instances.
WEB INTERFACE
To display the LACP Port status in the web interface:
1. Click Monitor, LACP, Port Statistics.
2. To auto-refresh the information, click “Auto refresh.”
3. Click “ Refresh“ to refresh the LACP Statistics.
FIGURE 4-35. LACP STATISTICS SCREEN
Parameter description:
Port: The switch port number.
LACP Received: Shows how many LACP frames have been received at each port.
LACP Transmitted: Shows how many LACP frames have been sent from each port.
Discarded: Shows how many unknown or illegal LACP frames have been discarded at each port.
Buttons:
- Auto-refresh: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
- Clear: Clears the counters for the selected port.
- Refresh: Click to refresh the page.
To Next Page
Loading...
