202
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
CHAPTER 4: MONITOR
4.8.2 PORT STATUS
After you complete the STP configuration, the switch can display the STP Port Status. The explains how to display the STP CIST port
status for physical ports of the currently selected switch.
WEB INTERFACE
To display the STP Port status in the web interface:
1. Click Monitor, Spanning Tree, STP Port Status
2. To auto-refresh the information, click Auto-refresh.
3. Click “ Refresh“ to refresh the STP Bridges.
FIGURE 4-38. STP PORT STATUS SCREEN
Parameter description:
Port: The switch port number of the logical STP port.
CIST Role: The current STP port role of the CIST port. The port role can be one of the following values: AlternatePort, Backup Port,
RootPort, or DesignatedPort Disabled.
CIST State: The current STP port state of the CIST port. The port state can be one of the following values: Blocking, Learning, or
Forwarding.
Uptime: The time since the bridge port was last initialized.
Buttons:
- Auto-refresh: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
- Refresh: Click to refresh the page.
To Next Page
Loading...
