204
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
CHAPTER 4: MONITOR
4.9 MVR
4.9.1 STATISTICS
The section describes how to display the MVR detail Statistics after you configure MVR on the switch. It provides detailed MVR
Statistics Information.
WEB INTERFACE
To display the MVR Statistics Information in the web interface:
1. Click Monitor, MVR, Statistics.
2. To auto-refresh the information, click Auto-refresh.
3. Click “ Refresh“ to refresh an entry of the MVR Statistics Information.
FIGURE 4-40. MVR STATISTICS INFORMATION SCREEN
Parameter description:
VLAN ID: The Multicast VLAN ID.
IGMP/MLD Queries Received: The number of Received Queries for IGMP and MLD, respectively.
IGMP/MLD Queries Transmitted: The number of Transmitted Queries for IGMP and MLD, respectively.
IGMPv1 Joins Received: The number of Received IGMPv1 Join’s.
IGMPv2/MLDv1 Reports Received The number of Received IGMPv2 Joins and MLDv1 Reports, respectively.
IGMPv3/MLDv2 Report’s Received: The number of Received IGMPv1 Joins and MLDv2 Reports, respectively.
IGMPv2/MLDv1 Leaves Received: The number of Received IGMPv2 Leaves and MLDv1 Dones, respectively.
Buttons:
- Auto-refresh: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
- Clear: Clears the counters for the selected port.
- Refresh: Click to refresh the page.
To Next Page
Loading...
