209
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
CHAPTER 4: MONITOR
4.10.1.2 GROUP INFORMATION
After you set the IGMP Snooping function, then the switch can display the IGMP Snooping Group Information. Entries in the IGMP
Group Table are shown on this page. The IGMP Group Table is sorted first by VLAN ID, and then by group. The switch will use the last
entry of the currently displayed table as a basis for the next lookup. When the end is reached the text “No more entries” is shown in
the displayed table. Use the button to start over.
WEB INTERFACE
To display the IGMP Snooping Group Information in the web interface:
1. Click Monitor, IGMP Snooping, Group Information
2. To auto-refresh the information, click Auto-refresh.
3. Click “ Refresh“ to refresh an entry of the IGMP Snooping Groups Information.
4. Click “<< or >> “ to move to previous or next entry.
FIGURE 4-44. IGMP SNOOPING GROUPS INFORMATION SCREEN
Parameter description:
Navigating the IGMP Group Table
Each page shows up to 99 entries from the IGMP Group table, default is 20, selected through the “entries per page” input field. When
first visited, the web page will show the first 20 entries from the beginning of the IGMP Group Table.
The “Start from VLAN”, and “group” input fields allow the user to select the starting point in the IGMP Group Table. Clicking the
button will update the displayed table starting from that or the closest next IGMP Group Table match. In addition, the two input fields
will—upon a button click—assume the value of the first displayed entry, allowing for continuous refresh with the same start address.
The switch will use the last entry of the currently displayed table as a basis for the next lookup. When the end is reached the text “No
more entries” is shown in the displayed table. Use the button to start over.
IGMP Group Table Columns
VLAN ID: VLAN ID of the group.
Groups: Group address of the group displayed.
Port Members: Ports under this group.
Buttons:
- Auto-refresh: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
- Refresh: Click to refresh the page.
|<<: Updates the system log entries to the first available entry ID
>> : Updates the system log entry to the next available entry ID
To Next Page
Loading...
