22
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
CHAPTER 3: SYSTEM CONFIGURATION
3.3 PORTS CONFIGURATION
The section describes how to configure the detailed port parameters of the switch. You can use Port configure to enable or disable
a switch port. Monitor the ports content or status in the function.
3.3.1 PORTS
This page displays current port configurations. Ports can also be configured here.
WEB INTERFACE
To configure a Current Port Configuration in the web interface:
1. Click Configuration, Ports Configuration, and Ports.
2. Specify the Speed Configured, Flow Control, Maximum Frame size, Excessive Collision mode, and Power Control.
3. Click Apply.
FIGURE 3-8. PORT CONFIGURATION SCREEN
Parameter description:
Port: This is the logical port number for this row.
Link: The current link state is displayed graphically. Green indicates the link is up and red that it is down.
Current Link Speed: Provides the current link speed of the port.
Configured Link Speed: Selects any available link speed for the given switch port. Only speeds supported by the specific port are
shown. Possible speeds are:
- Disabled - Disables the switch port operation.
- Auto - Port autonegotiates speed with the link partner and selects the highest speed that is compatible with the link partner.
To Next Page
Loading...
