EasyManua.ls Logo

Black Box LGB1126A-R2 - MAC Table

Black Box LGB1126A-R2
260 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
222
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
CHAPTER 4: MONITOR
4.12 MAC TABLE
Entries in the MAC Table are shown on this page. The MAC Table contains up to 8192 entries, and is sorted first by VLAN ID, then by MAC
address.
WEB INTERFACE
To Display MAC Address Table in the web interface:
1. Click Monitor, Dynamic MAC Table.
2. Specify the VLAN and MAC Address.
3. Display the MAC Address Table.
FIGURE 4-53. MAC ADDRESS TABLE
Parameter description:
Navigating the MAC Table
Each page shows up to 999 entries from the MAC table, default is 20, selected through the “entries per page” input field. When first
visited, the web page will show the first 20 entries from the beginning of the MAC Table. The first displayed will be the one with the
lowest VLAN ID and the lowest MAC address found in the MAC Table.
The “Start from MAC address” and “VLAN” input fields allow the user to select the starting point in the MAC Table. Clicking the
Refresh” button will update the displayed table starting from that or the closest next MAC Table match. In addition, the two input
fields will—upon a “Refresh” button click—assume the value of the first displayed entry, allowing for continuous refresh with the
same start address.
The >> will use the last entry of the currently displayed VLAN/MAC address pairs as a basis for the next lookup. When the end is
reached the text “No more entries” is shown in the displayed table. Use the l<< button to start over.

Table of Contents

Other manuals for Black Box LGB1126A-R2

Related product manuals