76
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 8 7 7. 2 26 9
3.5.3.2 TACACS+
WEB INTERFACE
You can configure a Common Configuration of AAA, TACACS+ in the web interface.
FIGURE 3-45. TACACS+ AUTHENTICATION SERVER CONFIGURATION SCREEN
Parameter description:
Global Configuration
These settings are common for all of the TACACS+ servers.
Timeout: Timeout is the number of seconds, in the range 1 to 1000, to wait for a reply from a TACACS+ server before it is considered
to be dead.
Deadtime: Deadtime, which can be set to a number between 0 to 1440 minutes, is the period during which the switch will not send
new requests to a server that has failed to respond to a previous request. This will stop the switch from continually trying to contact a
server that it has already determined as dead.
Setting the Deadtime to a value greater than 0 (zero) will enable this feature, but only if more than one server has been configured.
Key: The secret key—up to 63 characters long—shared between the TACACS+ server and the switch.
Server Configuration
The table has one row for each TACACS+ server and a number of columns, which are:
Delete: To delete a TACACS+ server entry, check this box. The entry will be deleted during the next Save.
Hostname: The IP address or hostname of the TACACS+ server.
Port: The TCP port to use on the TACACS+ server for authentication.
CHAPTER 3: SYSTEM CONFIGURATION
To Next Page
Loading...
