Black Box LGB5510A - System Reload Procedures; Reload Switch System

Publication date: , 2015
Revision A1
54
10 RELOAD of CLI
Reload system.
Syntax
reload { { { cold | warm } [ sid <usid> ] } | { defaults [ keep-ip ] } }
Parameter
cold Reload cold, i.e. reboot.
defaults Reload defaults without rebooting.
EXAMPLE
LGB5510A# reload defaults
% Reloading defaults. Please stand by.
LGB5510A# reload cold
% Cold reload in progress, please stand by.
LGB5510A# +M25PXX : Init device with JEDEC ID 0x20BA19.
Luton26 board detected (VSC7427 Rev. D).
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version 1_15a-Vitesse - built 18:36:46, Sep 9 2014
Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Free Software Foundation, Inc.
RedBoot is free software, covered by the eCos license, derived from the
GNU General Public License. You are welcome to change it and/or distribute
copies of it under certain conditions. Under the license terms, RedBoot's
source code and full license terms must have been made available to you.
Redboot comes with ABSOLUTELY NO WARRANTY.
Platform: VCore-III (MIPS32 24KEc) LUTON26