EasyManua.ls Logo

Black Diamond Equipment BD201045 User Manual

Black Diamond Equipment BD201045
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATORS MANUAL
MODEL #BD201045
2300W PORTABLE INVERTER GENERATOR
Mid-States Distributing, LLC., 2800 Meacham Blvd., Fort Worth, TX 76137 USA
or visit black-diamond.com
SAVE THESE INSTRUCTIONS. This manual contains important safety precautions which should be read and understood before operating the product. Failure to do
so could result in serious injury. This manual should remain with the product.
Specifications, descriptions and illustrations in this manual are as accurate as known at the time of publication, but are subject to change without notice.
This product meets the requirements of the PGMA (Portable Generator Manufacturers’ Association) standard ANSI/PGMA G300-2015 (Safety and Performance of
Portable Generators).
RE V 20221125
EN
Question and Answer IconNeed help?

Do you have a question about the Black Diamond Equipment BD201045 and is the answer not in the manual?

Black Diamond Equipment BD201045 Specifications

General IconGeneral
Fuel TypeGasoline
Engine Type4-Stroke OHV
Starting SystemRecoil
Noise Level69 dB
Fuel Tank Capacity1.06 gal
Run TimeUp to 11 hours
Weight47 lbs
Dimensions19.7 x 11.4 x 17.9 in
Outlets2 x 120V 20A, 1 x 12V DC

Summary

Introduction

Safety Definitions

Important Safety Instructions

Fuel Safety

Covers hazards and safe practices related to gasoline and its vapors.

Safety and Dataplate Labels

Explains the meaning of various safety labels and dataplate information.

Safety Symbols

Details the meaning of symbols used to indicate hazards and precautions.

Operation Symbols

Explains the symbols used for generator controls and functions.

Quick Start Label Symbols

Provides understanding of symbols for quick starting procedures.

Controls and Features

Generator Overview

Identifies the main external parts and components of the generator.

Control Panel Components

Details the functions of buttons, dials, and indicators on the control panel.

FCC Statement

Compliance information regarding Federal Communications Commission rules.

Industry Canada Compliance

Information on compliance with Industry Canada license-exempt RSS standards.

Assembly

Unpacking the Generator

Step-by-step guide for safely removing the generator from its packaging.

Adding Engine Oil

Instructions for checking and filling the engine oil to the correct level.

Adding Fuel

Procedures for safely fueling the generator with the correct type of gasoline.

Grounding the Generator

Explains the importance and methods for properly grounding the generator.

Operation

Generator Location and Placement

Guidelines for selecting a safe and appropriate location for generator use.

Surge Protection for Electronics

Recommendations for protecting sensitive electronic devices from voltage fluctuations.

Starting the Engine

Step-by-step instructions for safely starting the generator engine.

Connecting Electrical Loads

How to safely connect electrical devices to the generator.

Preventing Overload and Power Management

Strategies to avoid overloading the generator and manage power distribution.

Eco Mode and 12V DC Outlet Usage

Using economy mode and the 12V DC outlet for various applications.

Battery Charging and Parallel Operation

Procedures for charging batteries and connecting generators in parallel.

Stopping the Engine

Safe steps for shutting down the generator engine.

High Altitude Operation and Moving

Adjustments for high altitudes and safe methods for moving the generator.

Maintenance

Changing the Engine Oil

Guide on how to properly drain and refill the engine oil.

Cleaning the Generator

Instructions for cleaning the exterior and internal components of the generator.

Spark Plug and Air Filter Maintenance

Procedures for cleaning, adjusting spark plugs, and cleaning air filters.

Spark Arrestor Cleaning and Governor Adjustment

How to clean the spark arrestor and notes on governor adjustment.

Maintenance Schedule

Recommended service intervals for routine generator upkeep.

Storage

Short Term Storage (Up to 30 Days)

Procedures for storing the generator for periods up to 30 days.

Mid Term Storage (30 Days to 1 Year)

Guidelines for storing the generator for 30 days to one year.

Long Term Storage and Removal

Instructions for storing over one year and preparing for use after storage.

Specifications

Generator Specifications

Key electrical and physical characteristics of the generator unit.

Engine Specifications

Details on the engine model, displacement, and type.

Spark Plug and Valve Specifications

Information on spark plug type, gap, and valve clearances.

Oil, Fuel, and Temperature Specifications

Details on recommended oil, fuel requirements, and operating temperatures.

Troubleshooting

Warranty Information

Warranty Qualifications and Registration

Requirements for registering the product and qualifying for warranty service.

Repair and Replacement Policy

Details on the process for product repair or replacement under warranty.

Warranty Exclusions and Limitations

Outlines what is not covered by the warranty and liability limits.

Contact Information for Support

Provides contact details for customer service and technical support.

Emission Control System Warranty

Warranty Rights and Obligations

Explains the rights and responsibilities of owners regarding emission control systems.

Emission Control System Coverage

Details the manufacturer's warranty coverage for emission-related parts.

Owner Warranty Responsibilities

Outlines the owner's duties for maintaining the emission control system.

Emission-Related Parts List

Lists components covered under the emission control system warranty.

Related product manuals