3
STORE IDLE UNITS.
DO NOT
DO NOT
AVOID DANGEROUS ENVIRONMENTAL CONDITIONS –
STAY ALERT -
USE EXTRA CARE
DO NOT
DO NOT
USE ONLY
DO NOT
KEEP
DO NOT
DO NOT
USE ONLY
EXERCISE CARE
DO NOT OPEN OR MUTILATE
WARNING:
SYMBOLS
The label on your tool may include the following symbols.
The symbols and their definitions are as follows:
V ...................... volts A ...................... amperes
Hz .................... hertz W ..................... watts
min ................... minutes
or AC ........alternating current
or DC ...... direct current
n
o ....................no load speed
.................... Class I Construction .................... earthing terminal
(grounded)
.................. safety alert symbol
.................... Class II Construction .../min or rpm...revolutions or
(double insulated) reciprocation per minute
............... Read instruction manual before use
.................... Use proper respiratory protection
.................... Use proper eye protection
.................... Use proper hearing protection
To Next Page
Loading...