Need help?Do you have a question about the Blackline Safety G7 and is the answer not in the manual?
General| Water Resistance | Yes |
|---|---|
| Emergency Latch | Yes |
| Fall Detection | Yes |
| No Motion Detection | Yes |
| Two-way Voice Communication | Yes |
| Push-to-Talk | Yes |
| Connectivity | Cellular (4G LTE), Bluetooth |
| Satellite Connectivity | Optional Iridium satellite module |
| Operating Temperature | -20°C to +55°C |
| Sensors | Gas detection (LEL, O2, H2S, CO), motion, ambient light |
| Gas Detection | LEL, O2, H2S, CO |
| Location Technology | GPS |
| Compliance | ATEX, IECEx, CSA, UL |
| Display | LCD |
Describes the G7 as a wearable personal safety monitor that keeps users connected.
Explains how the G7 connects to the cloud-hosted system for safety monitoring.
Details the cloud-hosted web portal for monitoring and managing workers and devices.
Distinguishes between the G7c and G7x models and their connectivity to the network.
Compares features of G7c and G7x models with Standard, Single-gas, and Quad-gas cartridges.
Explains how to interact with the G7 using its LCD display and three-button menu system.
Describes the SureSafe indicator light (blinking/solid green) for connection status.
Instructions on how to charge the G7 device using the charging clip and cable.
Guidance on where to wear the G7 device for optimal monitoring.
Steps to power on the G7c device, including waiting for the SureSafe light.
Steps to power on the G7x, including connection to G7 Bridge.
Procedure for powering off the G7c device and logging off the network.
Procedure for powering off the G7x, including G7 Bridge considerations.
Details the features and indicators of a yellow pending alarm on the G7.
Explains how the G7 detects potential falls and initiates a yellow pending alarm.
Describes the G7's monitoring of motion and initiation of yellow pending alarms.
Explains periodic check-ins requested by the G7 during a shift.
How to receive and send messages, including pre-programmed and custom messages.
Details using the speakerphone for two-way voice calls with monitoring personnel.
Informs about yellow warning alarms when network connection is lost.
Explains yellow warning alarms indicating low battery levels.
Describes red alerts triggered by falls if not responded to.
Describes red alerts for no-motion if not responded to.
Explains red alerts for missed check-ins during a yellow pending alarm.
How to manually send an SOS alert for immediate assistance.
Procedure for performing a bump test to ensure sensor functionality.
Details yellow warning alarms for gas detection, including low concentration alerts.
Explains when G7 triggers a low yellow warning alarm for gas exposure.
Describes red alerts for high gas concentrations detected by the G7.
Explains STEL alerts indicating exposure limits have been reached.
Details how to get replacement expired gas cartridges for the G7.
Step-by-step instructions for changing the G7 gas cartridge.
Warns about chemical contaminants affecting gas sensor sensitivity.
General safety precautions for operating and servicing the G7 equipment.
Explains how the G7 device receives automatic firmware updates.
Provides website link for support and training materials for the G7.
Contact information for technical support and customer assistance.
Lists technical specifications for G7 features, sensors, size, and weight.
Covers device display, notifications, wireless radios, and location technology.
Details battery, operating conditions, and firmware update procedures.
Outlines regulatory approvals, intrinsic safety standards, and warranty terms.
Describes the cloud-hosted application for safety monitoring and customization.
General legal information, copyright, and disclaimers for the manual.
Details compliance with FCC and Industry Canada radio frequency regulations.
Safety warnings regarding product usage, electrical hazards, and temperature.
Lists various intrinsic safety standards, certifications, and model ratings.
To Next Page
