Do you have a question about the Blackmagicdesign Video Assist 12G HDR and is the answer not in the manual?
Model | Video Assist 12G HDR |
---|---|
Category | Camera Accessories |
Display Size | 7 inches |
Resolution | 1920 x 1200 |
HDR Support | Yes |
HDMI Standards | HDMI 2.0 |
Inputs | HDMI 2.0 |
Outputs | HDMI 2.0 |
Recording Formats | Apple ProRes, Avid DNx |
Media Storage | SD card, UHS-II |
Brightness | 2500 nits |
Audio Input | 3.5mm |
Audio Output | 3.5mm stereo mini jack |
Power | DC 12V |
SDI Standards | SMPTE 259 |
Battery Type | LP-E6 |
Connects the video assist to a power source for operation.
Connects video and audio sources via SDI, HDMI, or XLR inputs.
Details inserting SD cards for recording media.
Starts and stops recording, and covers continuous recording.
Describes transport controls and looping playback options.
Utilizes Zebra and Focus Peaking for exposure and focus assistance.
Employs Guides and Grids for framing and composition.
Covers False Color, Contrast, Brightness, Saturation, and Auto Dim.
Details supported codecs, video standards, and timecode management.
Provides Waveform, RGB Parade, Vectorscope, Histogram analysis, and zoom.
Displays media status, capacity, audio meters, and level adjustments.
Covers various menu options including LUTs, reset, and filename prefix.
Manages clip metadata using the digital slate interface.
Details entering reel, scene, take, project, and lens data.
Connects cameras and configures settings for RAW recording.
Explains constant bitrate vs. constant quality codec choices.
Recommends SD cards/USB-C disks and guides media formatting.
Accesses SD card files and checks storage performance with Disk Speed Test.
Provides instructions for updating the device firmware.
Covers project setup, editing, and importing clips in Resolve.
Details adjusting RAW settings and project settings in Resolve.
Explains using the color page, scopes, and primary/secondary adjustments.
Adds visual effects and composites using nodes in the Fusion page.
Covers audio mixing in the edit page and Fairlight page, including EQ.
Discusses Quick Export and the Deliver page for outputting projects.
Accesses manuals, support notes, forums, and contact information.
Details how to check the installed software version and get updates.
Outlines FCC, ISED compliance statements, and EU waste disposal.
Covers product usage safety, environmental warnings, and warranty details.