Need help?Do you have a question about the Blanco DigiFlow 8300T-22F and is the answer not in the manual?
General| Type | Digital Flow Meter |
|---|---|
| Accuracy | ±0.5% of reading |
| Operating Temperature | 14 to 176 °F (-10 to 80 °C) |
| Display | LCD |
| Protection Class | IP65 |
| Material | Stainless Steel |
| Power Supply | Battery |
| Storage Temperature | -4 to 176 °F (-20 to 80 °C) |
Details on filter capacity monitor, battery, voltage, current, flow rate, temperature, pressure, weight, accuracy, and connection.
Procedure for determining local water hardness using the device.
Step-by-step instructions for initial installation and mounting.
Instructions for securing the unit and making essential water connections.
Reference to specific installation steps (16-21).
Information on filter capacity and how to set it on the device.
Detailed steps for programming device functions and adjusting settings.
Instructions for flushing the system after installation or filter replacement.
How to perform a system reset on the Flowmeter.
Procedures for removing and replacing the filter cartridge.
Instructions for replacing batteries and understanding battery status alerts.
To Next Page