BL-183 / BL-233 SANDER/POLISHER
SECTION 4 ADDITIONAL SAFETY RULES
INSTRUCTION MANUAL
OCTOBER 2008
Electrical servicing work:
Make sure that electrical components used for replacement purposes comply
with the original parts and are correctly adjusted if necessary.
Definition of the Safety Off Position: The machine is in a safe condition where
it cannot generate any hazard.
Putting the equipment in the Safety off position involves:
9 Switching off the grinding machine.
9 Switching off the dust collector (if being used).
9 Waiting for all drives to stop.
9 Pulling out mains plug.
9 Securing against unintended restart.
Any machine, if it is not used according to the regulations, may
be hazardous for operating, set-up and service personnel. The
operating authority is responsible for compliance with the
safety regulations during operation and maintenance, and for the
use of safety devices supplied with the machine, as well as the
provision of appropriate additional safety devices!
To Next Page
