Blaupunkt AUGSBURG CR 24 - Page 5

15
Augsburg CR 24
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
7 1, 2, 3, 4, 5, 6 - preset buttons
For each memory bank (I, II, III) you
can store up to 6 stations.
To store a station: Press button during
radio operation and hold it. First the
station will be muted and then becomes
audible again.
To recall a station: Select the memory
bank using the FM•T button and press
the respective preset button (press re-
peatedly if necessary).
Extra function:
Coding - Read chapter “Anti-theft cod-
ing” first.
Buttons 1, 2, 3, 4 - To enter the code.
Press each button repeatedly until the
code of the car radio pass is indicated
in the display.
8 lo
Station search sensitivity
“lo” lit up in the display indicates normal
sensitivity for the station search func-
tion (the system will pick up strong sta-
tions only).
“lo” not lit up in the display indicates
high sensitivity for the station search
function (the system will also pick up
weaker stations).
To change the search sensitivity:
press lo.
9 ARI - traffic messages
When ARI is visible in the display, you
can only listen to those radio stations
which broadcast traffic messages.
ARI on/off: press button.
: FM•T - FM, Travelstore
Selector for the FM memory banks I, II,
III and “T” (Travelstore).
To change the memory bank:
Press button until the desired memory
bank in indicated in the display.
To store the six nearest, strongest stati-
ons automatically with Travelstore:
Store: Press FM•T until the search
starts in the display.
Recall: Press FM•T until “T” appears in
the display. Then briefly press one of
the presets 1, 2, 3, 4, 5, 6.
; PS (Preset-Scan)
To sample all stored stations of the
selected memory bank (FM I-III or T)
briefly.