Specifications
BT 105e
AMPLIFIER
Power distribution: 2 x 42.5W peak power / 2 x 22 Watt RMS (THD: 10%)
Frequency response: 40 Hz - 20 kHz
Signal/Noise ratio: > 75 dB
Separation: > 45 dB
SPEAKERS
Tweeter driver type: 1” x 2
Tweeter rated power: 5 Watt x 2 (8 Ohm)
Woofer driver type: 4” x 2
Woofer rated power: 18 Watt x 2 (4 Ohm)
INTERFACES
Output: Binding posts
Input: 2RCA
BLUETOOTH
Bluetooth 2.1 + EDR (Enhanced Data Rate),
A2DP and AVRCP profiles
POWER
Power supply: 100 V - 240 V 50/60 Hz 850 mA
Total output: 85 Watt peak power / 44 Watt RMS (THD: 10%)
Power consumption (on mode): 85 Watt
Power consumption (stand-by mode): <0,5 Watt
33
To Next Page
Loading...
